Comments on: In Review: Sig P226 .22 Conversion

By: admin

admin — Thu, 01 Jan 1970 00:00:00 +0000

Jeff, sorry to hear about the troubles. I too noticed that there is some binding of the slide during takedown. I found that you have to wiggle the takedown lever back and forth a bit while you push the slide forward. This is likely a design issue, and I doubt the factory will fix that. The rest should be fixed… maybe there is a tiny burr in the chamber that is causing the issues. I have to admit, it is not the most reliable .22 platform. However, it should work well enough to make plinking fun and affordable.
Keep us posted on how they take care of you.

By: jeff

jeff — Thu, 01 Jan 1970 00:00:00 +0000

Mine went back to Sig 4 days after I got it. The trigger felt like it had been buried in a sandbox and the upper would not come off the frame. Multiple FTF, and the first round, almost always, had to be struck twice by the firing pin in order to discharge. Major disappointment.

By: THEdude

THEdude — Thu, 01 Jan 1970 00:00:00 +0000

now if I could just find a bulk pack of 22 at WalMart I’d be set